Tipping bucket, bucket or bucket elevator
For example, forging plants or sandblasting plants with interchangeable cylinder holders and removable roller carriers. Powder coated on request.
Wear head-screws for drum lining and deflector plates T-13/15
The head is made of austenitic manganese steel, the threaded stems feature an 8.8 quality in the required length (e.g., 70mm, 80mm, or 100mm).
Wear head screws for drum lining DTC
The head is made of austenitic manganese steel, the threaded stems feature a 8.8 quality in the required length (e.g., 70mm, 80mm, or 100mm).
Drum lining for DTC
The lining plates and the riders are made of austenitic manganese steel. The lining plates are attached with M20 × 100 wear head screws.
Wear shell and deflector plates for drum intake T-13
The wear shell and the deflector plates are made of austenitic manganese steel. Deflector plates are attached with M20 × 70 wear head screws.
Deflector plates for the wheel-blast doors of T-13
Deflector plates are made of austenitic manganese steel with threaded block. These are attached with M12 screws.
Wheel-blast brackets for the wheel-blast doors of T-13
Wheel-blast brackets are made of austenitic manganese steel and feature standard steel flanges. They are strengthened with additional manganese on the sides where the deflector plate is screwed!
Deflector plates for sandblasting equipment T-7
The deflector plate is made of austenitic manganese steel and is screwed under the wheel-blast.
Deflector plate to protect the service door of the sandblasting equipment T-7
The deflector plate is made of austenitic manganese steel and is mounted under the wheel-blast.
Cover disk for 380s wheel-blast
The cover disk is made of austenitic manganese steel and attached with an accelerator to protect the bucket plates mounting.
Wear countersunk head screws to attach the lining plates to the 380s wheel-blast
Wear countersunk head screws have a hardened top head.
Pressure plate with clamping screw for 380s wheel-blast
The pressure plate is made of standard steel and features elongated holes for mounting and a M16 threaded hole for the clamping screw.
Drum bottom flap for the sandblasting equipment
The drum bottom flap is made of 20mm standard steel and provided with all mounting holes for the wear plate and the bearings.
Bearing bracket for the drum bottom flap of the sandblasting equipment T-13
The bearing bracket is made of 20mm standard steel and provided with all mounting holes for the drum bottom flap and the bearings.
Bearing blocks for the drum bottom flap cylinder of the sandblasting equipment T-13
The lower and upper bearing blocks are made of standard steel and provided with fitting bores for the bolts and the mounting holes.
Bolts with fitting bushes.
Screener sieve with renewable sieve
The sieve enclosure walls are made of manganese plate and the sieve can be easily replaced.
Rollers with axis for the feeder of the sandblasting equipment DTC
The rollers are made of rigid plastic. he steel axis with the ground plate in which the fixing holes are located.
Clamping element for motor brackets
Thanks to its flat construction, the screws press fully on the motor base plate.
The clamping element is screwed and can be easily renewed.
Level monitoring for abrasive storage bunker
The initiator is covered by Plexiglas, whether the abrasive (metallic) is present or not. The abrasive refilling point will be indicated by a red warning light on the control cabinet.